How to Install Check_MK (Monitoring Tool) on CentOS 7 / RHEL 7

Check_MK is a free and open source IT monitoring tool for Linux like Operating Systems. Check_MK is a Nagios based plugin that improves on Nagios monitoring system capabilities & performance. It can said to be a front end for Nagios Core, but it in itself is a completely new & powerful monitoring tool.  It replaces the standard Nagios GUI & way the systems are monitored on Nagios, it provides graphical administration of monitoring & boosts other features like auto detection of configurations in a monitored system, specials checks in addition to Nagios checks, SNMP based agentless monitoring, filtering, viewing & alerting for log files & event data.

Check_mk allows to create rule based configurations using Python & offloading work from Nagios core system to make it scale better & thus allowing us to monitor more systems from a single nagios server.

Though it is based on nagios but it’s different in many ways than nagios like higher number of service checks i.e. a server can have up to 1000 service checks monitored, check interval time is 1 minute as opposed to 5 minutes in nagios, nagios’s latency issues are solved with focus on passive checks, rule based configurations are preferred with check_mk over explicit configuration statements.

We will now discuss the installation of Check_MK using the OMD bundle. OMD or Open Monitoring Distribution is a bundle that includes Nagios & all the required plugins needed for monitoring. It also has Check_MK bundled along with nagios monitoring. OMD is available for a number of Linux distributions, but we will be using OMD on CentOS 7 servers.

In this tutorial I will be using the following Servers:

  • – CentOS 7 ( Check_MK Server)
  •  – CentOS 7 ( Linux Host )
  • – Windows Server 2012 R2 ( Windows Host )

Prerequisites for Check_MK Server

  • Make sure that we that we have xinetd and openssl installed on our system, it’s actually comes pre-installed on most of the linux distributions, Use below command to install xinetd and openssl
[root@linuxtechi ~]# yum install xinetd openssl -y
  • Python also needs to be installed on the machine. Check_mk supports Python 2.3+ versions & still does not support Python 3.Run below command to install python
[root@linuxtechi ~]# yum install python -y

In the default CentOS 7 and RHEL 7 yum repositories python 2.7 is available.

  • We need to have EPEL repository installed on our system, as OMD uses some packages that are not available on default CentOS repositories but are available on EPEL repositories. To install EPEL repository on CentOS 7 system, open the terminal & execute the below mentioned command,
[root@linuxtechi ~]# yum install epel-release -y

Once the repository has been installed & enabled, we will Set the firewall and selinux rules for check_mk and then move on with the installation part.

Firewall and SELinux Rule for check_mk

In case firewall is running on your CentOS 7 / RHEL 7 Server then allow port 80 using the following command.

[root@linuxtechi ~]# firewall-cmd --permanent --zone=public --add-port=80/tcp
[root@linuxtechi ~]# firewall-cmd --reload

SELinux Rule for check_mk

[root@linuxtechi ~]# setsebool -P httpd_can_network_connect 1

Installation of Check_MK

As mentioned above, OMD is available for a number of Linux distributions & we can download pre-built packages for all these distros. So we will first have to get rpm from OMD’s Official Website ( . To download the rpm, run

[root@linuxtechi ~]# wget

Now we will install the OMD rpm using the yum command. We are using yum as it will also install all the dependencies required for OMD installation,

[root@linuxtechi ~]# yum install --nogpgcheck check-mk-raw-1.4.0p12-el7-59.x86_64.rpm

The option –nogpgcheck is needed as the omd package is not signed & might throw an error during installation. Our OMD package has now been installed, we will now configure it to use the Check_MK package.

Check_MK Configurations

Firstly, after omd installation, we need to create a instance on OMD. We can create a number of instance on OMD like one for production, one for testing (sandbox) or simply one instance for monitoring etc.

So to create the instance, execute the following command,

[root@linuxtechi ~]# omd create sandbox


Above command will create a new instance on omd, along with a user & group named ‘sandbox’, also a home folder for the user ‘sandbox’ is created under ‘/omd/sites/sandbox’. Now to start the instance, we will switch to that user & run ,

[root@linuxtechi ~]# su - sandbox
OMD[sandbox]:~$ omd start


This will start the sandbox instance that we have created & we can access it through the Web browser with the following link,


Use the user name as “cmkadmin” and password was there in command output when we create sandbox instance. Though we can change the password using the beneath command:

OMD[sandbox]:~$ htpasswd -m ~/etc/htpasswd cmkadmin

Once we have logged in, we will able to see the dashboard for check_mk.


It’s showing empty for all the servers & services as we have not enabled any service as of now & that’s what we will do in our next step.

Adding a Linux host to Check_MK

Now we will add a Linux host (CentOS 7 / RHEL 7), To add any Linux host to Check_MK we require to install Check_mk Agent. Check_mk agent package can downloaded from OMD instance or ChecK_MK Server  from URL:


We can also download from official website. To Install ‘check_mk_agent’ rpm from command line, use below command:

[root@dbserver ~]# rpm -ivh

Allow port in firewall in case it is running on Linux Host

[root@dbserver ~]# firewall-cmd --permanent --add-port=6556/tcp
[root@dbserver ~]# firewall-cmd --reload

As we have installed agent installed in one of linux system, Next task is to add the host details through check_mk Web UI. To do that , open the Check_mk Web UI & navigate to ‘WATO-Configuration’ , than select ‘Hosts’ & in ‘Hosts’ , select ‘Create new host


Provide the details as mentioned in the screenshot i.e. hostname, IP address & agent type.


After the details have been entered, click on ‘Save & go to Services‘. Within 10-20 seconds, a list of services will be populated automatically,

Check-MK-Services-host dbserver

This concludes the registration of Linux Server to Monitoring Solution (check_mk). Now we can start monitoring services and other parameters of Linux Host from Check_MK Web UI.

Adding a Windows Host to Check_MK

Now we will add a Windows host machine to Check_mk, to do this download agent setup from omd server or check_MK server


Once the installation of agent has been completed on Client machine, we will get something like below :


Add new host using Check_mk Web UI, as we did above. Once host has been created the services page will automatically pull the status of all the services.


This completes our tutorial, Please share your feedback and comments.

Read AlsoHow to Install Zabbix Server 4.x on CentOS 7 / RHEL 7

Share on:

I am a Cloud Consultant with over 15 years of experience in Linux, Kubernetes, cloud technologies (AWS, Azure, OpenStack), automation (Ansible, Terraform), and DevOps. I hold certifications like RHCA, CKA, CKAD, CKS, AWS, and Azure.

14 thoughts on “How to Install Check_MK (Monitoring Tool) on CentOS 7 / RHEL 7”

  1. Dear Pradeep,

    Kindly give your input on this,
    It will help me a lot, I’m facing some issue.
    My check_mk plugin is not updating inventory from nagios server.
    Both (Nagios and check_mk) servers have on same host.

    Your response will highly appreciate.

  2. Hi Pradeep,

    Is it necessary to have xinetd installed on the server to be monitored. It seems installing the agent rpm does not include xinetd.

    I have seen in some blogs that xinetd is necessary for Check_MK to work properly.

    Please share your thoughts. Thanks in advance.

    • you don’t need xinetd, it works fine with systemd. if you have a new version of centos/redhat it will install with systemctl automatically, xinetd is disabled. if you have a older version the next two commands should work just fine.

      #systemctl enable check_mk.socket
      #systemctl start check_mk.socket

  3. HI,
    After configuring everything i am getting CPU utilization and DISK IO summary Pending.
    Any help on how to get this resovled?

    • Use “Reschedule Check_MK service” for both services OR restart the agent on the system where is it installed and run the command check_mk_agent and see the output of it and after this test it in WATO on the properties for the system is a an option Save & Test and in the agent window you should see the output from the agent

  4. Good day,
    Can you please help get out of that loop of dependencies during installation of check-mk-raw:
    Finished Dependency Resolution
    Error: Package: php-mbstring-5.4.16-46.el7.x86_64 (@/php-mbstring-5.4.16-46.el7.x86_64)
    Requires: php-common(x86-64) = 5.4.16-46.el7
    Removing: php-common-5.4.16-46.el7.x86_64 (@/php-common-5.4.16-46.el7.x86_64)
    php-common(x86-64) = 5.4.16-46.el7
    Updated By: php-common-5.4.16-46.1.el7_7.x86_64 (ol7_latest)
    php-common(x86-64) = 5.4.16-46.1.el7_7
    Available: php-common-5.4.16-45.el7.x86_64 (ol7_latest)
    php-common(x86-64) = 5.4.16-45.el7
    You could try using –skip-broken to work around the problem
    You could try running: rpm -Va –nofiles –nodigest
    # rpm -qa | grep php-mbstring
    # rpm -qa | grep php-common

  5. Is there Nagios console available after check-mk-raw installed? To compare with OMD there is a landing page comprising as separate consoles Nagios, Check_MK Multisite, PNP4Nagios, etc
    Why I am asking that: in Nagios console there is a useful option to group logically/functionally Host Group and Service Group to have easily seen statuses for certain group of servers, or their services


Leave a Comment