How to Install Tripleo(Openstack on Openstack) UnderCloud on CentOS 7

Install-undercloud-centos7

Undercloud is a single node OpenStack installation deployed either in a Virtual machine or in bare metal server. The objective of undercloud is to install, test, manage and update its overcloud servers (Controller, Compute & Storage nodes). In Red Hat terminology undercloud is known as “Director“. Undercloud basically contains all the images that is required to deployed Overcloud Controller, Computes, Swift and Storage.

Overcloud is the actual functional cloud for any organization where all the Virtual Machines are created on compute nodes and handle all the workloads. In other words we can say overcloud provides the openstack services like Nova, Keystone , Horizon, Neutron, cinder, Glance, Heat & Ceilometer Services.

In this article we will demonstrate how to install TripleO undercloud or Director on CentOS 7 VM.

Following are the minimum system requirements for undercloud:

  • 16 GB RAM
  • 1 Quad Core CPU
  • 80 GB disk Space
  • 2 Nics
  • CentOS 7.x / RHEL 7.x

Below are my lab setup details:

  • CentOS 7 VM (Minimal Installation) is hosted inside the KVM hypervisor.
  • Two Interfaces are attached to VM (Provisioning & NAT)
  • Provisioning Network: 192.168.126.0/24
  • NAT Network: 192.168.122.0/24
  • IP Address on eth0 is 192.168.122.90 and IP Address on eth1 is 192.168.126.1

To successfully install undercloud inside a virtual machine, you have to enabled Nested Virtualization in KVM hypervisor, if you not sure how to enable it, refer the below:

Let’s jump into the CentOS 7 VM and follow the below Steps:

Step:1) Set the Hostname and update /etc/hosts file

Run the hostnamectl command to set the hostname,

[[email protected] ~]# hostnamectl set-hostname "undercloud.example.com"
[[email protected] ~]# exec bash
[[email protected] ~]#

Add the following entries using the beneath command:

[[email protected] ~]# echo "192.168.126.1    undercloud.example.com" >> /etc/hosts

Update your system using below yum command and reboot once.

[[email protected] ~]# yum update -y && reboot

Step:2) Create non-root user (stack)

Run the beneath commands one after the another to create stack user and assign sudo rights to it. We will install undercloud using stack user only.

[[email protected] ~]# useradd stack
[[email protected] ~]# echo "enter_password_here" | passwd --stdin stack
[[email protected] ~]# echo "stack ALL=(root) NOPASSWD:ALL" | sudo tee -a /etc/sudoers.d/stack
stack ALL=(root) NOPASSWD:ALL
[[email protected] ~]# chmod 0440 /etc/sudoers.d/stack
[[email protected] ~]# su - stack
[[email protected] ~]$

Step:3) Enable required repositories for undercloud

Execute the below commands to enable and configured required repositories for undercloud installation.

[[email protected] ~]$ wget https://trunk.rdoproject.org/centos7/current/python2-tripleo-repos-0.0.1-0.20190328140951.a7bc8dc.el7.noarch.rpm
[[email protected] ~]$ rpm -ivh python2-tripleo-repos-0.0.1-0.20190328140951.a7bc8dc.el7.noarch.rpm
[[email protected] ~]$ sudo -E tripleo-repos -b rocky current
[[email protected] ~]$ sudo yum -y install yum-plugin-priorities
[[email protected] ~]$ sudo yum install epel-release -y

Note : We can check the latest version of python2-tripleo-repos from RDO repository

Step:4) Install TripleO CLI package using yum command

[[email protected] ~]$ sudo yum install python-tripleoclient -y

Step:5) Copy & edit “undercloud.conf” sample file that suits to your env

[[email protected] ~]$ cp /usr/share/instack-undercloud/undercloud.conf.sample ~/undercloud.conf

Now edit ‘undercloud.conf‘ that suits to your environment, In my case I am adding the following content under “Default” Section

[[email protected] ~]$ vi undercloud.conf
[DEFAULT]
local_ip = 192.168.126.1/24
undercloud_public_vip = 192.168.126.2
undercloud_admin_vip = 192.168.126.3
local_interface = eth1
masquerade_network = 192.168.126.0/24
dhcp_start = 192.168.126.100
dhcp_end = 192.168.126.150
network_cidr = 192.168.126.0/24
network_gateway = 192.168.126.1
inspection_iprange = 192.168.126.160,192.168.126.199
generate_service_certificate = true
certificate_generation_ca = local
………………………………

Save and exit the file.

Step:6) Start undercloud installation using openstack command

Now start undercloud installation using below openstack command,

[[email protected] ~]$ openstack undercloud install

Once the installation is completed successfully, we will get the output something like below

Undercloud-installation-completed-message

Verify the OpenStack Service list

[[email protected] ~]$ source stackrc
(undercloud) [[email protected]oud ~]$ openstack service list
+----------------------------------+------------------+-------------------------+
| ID                               | Name             | Type                    |
+----------------------------------+------------------+-------------------------+
| 19f1261745004b31bc77dcb17a5ed4f5 | heat-cfn         | cloudformation          |
| 1bdd5dfbc36f444ebe62580d71f1a7ec | heat             | orchestration           |
| 2b39423f188b412d85bed43f112b35d7 | zaqar-websocket  | messaging-websocket     |
| 46f64d65be874718a1b2c123f588371b | keystone         | identity                |
| 605261da43d64395b72acc5309a22096 | mistral          | workflowv2              |
| 6f50fb704b224c1abc3c2a1a163eb73a | neutron          | network                 |
| 7110b7d7711a4aa1af6a3c13566be28f | zaqar            | messaging               |
| 7e41468745724ecfa8ed339137e8b700 | placement        | placement               |
| 853efa8a8acf403b827617725c3b7322 | ironic-inspector | baremetal-introspection |
| a5522e5df77343b99a0e47812323a17b | swift            | object-store            |
| b9bbb1a771704b57a0833d738bfb86e5 | glance           | image                   |
| d50fdfa25fb64c3e865c172754452ab1 | ironic           | baremetal               |
| e2ea283690c742d3a98bd1eae6f9b830 | nova             | compute                 |
+----------------------------------+------------------+-------------------------+
(undercloud) [[email protected] ~]$

This confirms that undercloud has been installed successfully. In the next article we will demonstrate how to import overcloud images in under cloud and how to create inventory file for overcloud servers and then we will see how we can deploy overcloud servers via undercloud.

Read More on: How to deploy TripleO Overcloud (Controller , Compute) on CentOS 7 VMs

In case this article helps you to understand how to install undercloud on CentOS 7 VM, please do share your feedback and comments.

43 thoughts on “How to Install Tripleo(Openstack on Openstack) UnderCloud on CentOS 7”

  1. How to do the step “Two Interfaces are attached to VM (Provisioning & NAT)” in Centos virt-manager ?

    virt-manager gui -> New VM -> Network selection -> Host device enpls0:macvtap
    Source mode : Bridge

    Like this?

  2. Hello Pardeep, actually I’m having issue while some sort of issues while setting the Networking Block for VM like Provisioning and NAT. I’ve done every thing, Enabled Nested Virtualization, Configure IP Forwarding but I don’t have the Network Connectivity between my VM and Host. even I’ve used ‘tcpdump’ to capture the traffic and I’ve got the result regarding ‘ARP’. both systems are not able to resolve ARP Requests. so plz help me to solve this issue
    My Setup : RHEL 7.3 as Host as well Guest( for UnderCloud )

  3. Please explain network address details.
    local_ip = 192.168.126.1/24
    undercloud_public_vip = 192.168.126.2
    undercloud_admin_vip = 192.168.126.3
    local_interface = eth1
    masquerade_network = 192.168.126.0/24
    dhcp_start = 192.168.126.100
    dhcp_end = 192.168.126.150
    network_cidr = 192.168.126.0/24
    network_gateway = 192.168.126.1
    inspection_iprange = 192.168.126.160,192.168.126.199
    generate_service_certificate = true
    certificate_generation_ca = local

  4. Hello Pradeep, I have some confusion. Could you share about how to create Provisioning & NAT Network on KVM host ? Do physical interfaces need to be attached to the bridges belonged to Provisioning & NAT Network ? And do bridges need to be created with IPs ? Many thanks!

    1. Hi Jay,

      You need to create two networks i.e Provisioning and NAT using ‘virsh net-define’ on your KVM hypervisor, Specify the IP address range in the networks xml file,

      virsh net-define /tmp/provisioning.xml

      After creating the networks, attach these network to undercloud Interfaces via Bridges.

      1. hi Pradeep, I have successfully completed undercloud & overcloud installation. Thank you very much! !
        And I have other confusions. Thanks in advance.
        (1) Would it be OK if Provisiong Network not created using virsh net-define and I just create a bridge assigning IP address and then make undercloud & overcloud interfaces attached to the bridge ? if not, why ?
        (2) When configuring neutron, you know, which overcloud compute node interface should be attached to the bridge that will be configured in ”bridge_mappings = :” in openvswitch_agent.ini ? That means which interface is used to openstack VM network ?

    2. Hi Pradeep ,

      Please help me in tackling this error.

      [email protected] network-scripts]$ cat /home/stack/.instack/install-undercloud.log | less
      [[email protected] network-scripts]$ vi /home/stack/undercloud.conf
      [[email protected] network-scripts]$ cat /home/stack/.instack/install-undercloud.log | less
      [[email protected] network-scripts]$ vi /home/stack/undercloud.conf
      [[email protected] network-scripts]$ cat /home/stack/.instack/install-undercloud.log | less
      2018-04-12 21:00:16,199 INFO: Version:
      2018-04-12 21:00:16,199 INFO: Config: 1523580033
      2018-04-12 21:00:16,228 INFO: Puppet: 4.8.2
      2018-04-12 21:00:36,916 INFO: + rc=1
      2018-04-12 21:00:36,931 INFO: + set -e
      2018-04-12 21:00:36,956 INFO: + echo ‘puppet apply exited with exit code 1’
      2018-04-12 21:00:36,957 INFO: puppet apply exited with exit code 1
      2018-04-12 21:00:36,957 INFO: + ‘[‘ 1 ‘!=’ 2 -a 1 ‘!=’ 0 ‘]’
      2018-04-12 21:00:36,958 INFO: + exit 1
      2018-04-12 21:00:37,172 INFO: [2018-04-12 21:00:37,156] (os-refresh-config) [ERROR] during configure phase. [Command ‘[‘dib-run-parts’, ‘/usr/libexec/os-refresh-config/configure.d’]’ returned non-zero exit status 1]
      2018-04-12 21:00:37,178 INFO:
      2018-04-12 21:00:37,189 INFO: [2018-04-12 21:00:37,182] (os-refresh-config) [ERROR] Aborting…
      2018-04-12 21:00:37,726 DEBUG: An exception occurred
      Traceback (most recent call last):
      File “/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py”, line 2285, in install
      _run_orc(instack_env)
      File “/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py”, line 1592, in _run_orc
      _run_live_command(args, instack_env, ‘os-refresh-config’)
      File “/usr/lib/python2.7/site-packages/instack_undercloud/undercloud.py”, line 671, in _run_live_command
      raise RuntimeError(‘%s failed. See log for details.’ % name)
      RuntimeError: os-refresh-config failed. See log for details.
      2018-04-12 21:00:37,937 ERROR:

      1. I was able to resolve this error by adding more memory to VM. I could figure out this on carefully inspecting log which was indicated that its not able to fork the process.

    3. Melborn De Chavez

      Kindly update. It seems to have a problem with repository

      failure: repodata/repomd.xml from delorean-current: [Errno 256] No more mirrors to try.
      ‘https://trunk.rdoproject.org/centos7/f6/b8/f6b8de2dad0ecf1ff3c9de383be5$/repodat a/repomd.xml’: [Errno 14] HTTPS Error 404 – Not Found

        1. I have checked network settings, these added br-ctlplane and docker0 interface, and then original eth cannot have IP address, so can’t connect to internet, please help.

        2. Hi Pradeep,

          Seems there is a problem with repository, i have encountered the below.

          failure: repodata/repomd.xml from delorean-current: [Errno 256] No more mirrors to try.
          ‘https://trunk.rdoproject.org/centos7/current/delorean.repo/repodata/repomd.xml’: [Errno 14] HTTPS Error 404 – Not Found

          also with the

          baseurl=’https://trunk.rdoproject.org/centos7/f6/b8/f6b8de2dad0ecf1ff3c9de383be5f12c873fcfa2_26625a85′

          both are not working. Please do needful.

          1. Looks like you need to follow ‘https://trunk.rdoproject.org/centos7-master/current-passed-ci/delorean.repo’ this link each time if you face this issue, as this one contains the latest info.
            e.g. for now the repo link is ‘https://trunk.rdoproject.org/centos7/d8/ba/d8bae7b99708a308fb52ec13ae71f5a5f42a0a5d_e972080c’

            Also on step5 path has been changed. New path is
            cp /usr/share/python-tripleoclient/undercloud.conf.sample ~/undercloud.conf

            Thanks
            Ashish

          1. Hi Wilson,

            I just modified the name and base_url line of the file from this article with the lines from the file I linked too.

            Chris

        3. I stuck at this stage, anyone can help?

          TASK [Run tripleo-container-image-prepare] **************************************************************************************************************************************************
          [WARNING]: Consider using ‘become’, ‘become_method’, and ‘become_user’ rather than running sudo
          fatal: [undercloud]: FAILED! => {“changed”: true, “cmd”: “sudo /usr/bin/tripleo-container-image-prepare –roles-file /tmp/ansible.3LG7JQ-role-data –environment-file /tmp/ansible.R937V3-prepare-param –cleanup partial 2> ../install-undercloud.log”, “delta”: “0:05:04.372270”, “end”: “2018-10-08 14:45:26.273667”, “msg”: “non-zero return code”, “rc”: 1, “start”: “2018-10-08 14:40:21.901397”, “stderr”: “”, “stderr_lines”: [], “stdout”: “”, “stdout_lines”: []}

          NO MORE HOSTS LEFT **************************************************************************************************************************************************************************

          PLAY RECAP **********************************************************************************************************************************************************************************
          undercloud : ok=188 changed=101 unreachable=0 failed=1

          ** Found ansible errors for undercloud deployment! **
          [
          [
          “Run tripleo-container-image-prepare”,
          {
          “_ansible_parsed”: true,
          “stderr_lines”: [],
          “cmd”: “sudo /usr/bin/tripleo-container-image-prepare –roles-file /tmp/ansible.3LG7JQ-role-data –environment-file /tmp/ansible.R937V3-prepare-param –cleanup partial 2> ../install-undercloud.log”,
          “end”: “2018-10-08 14:45:26.273667”,
          “_ansible_no_log”: false,
          “stdout”: “”,
          “changed”: true,
          “rc”: 1,
          “start”: “2018-10-08 14:40:21.901397”,
          “warnings”: [
          “Consider using ‘become’, ‘become_method’, and ‘become_user’ rather than running sudo”
          ],
          “delta”: “0:05:04.372270”,
          “invocation”: {
          “module_args”: {
          “warn”: true,
          “executable”: null,
          “_uses_shell”: true,
          “_raw_params”: “sudo /usr/bin/tripleo-container-image-prepare –roles-file /tmp/ansible.3LG7JQ-role-data –environment-file /tmp/ansible.R937V3-prepare-param –cleanup partial 2> ../install-undercloud.log”,
          “removes”: null,
          “argv”: null,
          “creates”: null,
          “chdir”: null,
          “stdin”: null
          }
          },
          “stdout_lines”: [],
          “stderr”: “”,
          “msg”: “non-zero return code”
          }
          ]
          ]
          Install artifact is located at /home/stack/undercloud-install-20181008144526.tar.bzip2

          !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

          Deployment Failed!

        4. For Step Number 3 :
          Change name and baseURL for the repository with the following :
          name=delorean-openstack-tempest-f60ad6c2010e9a65a993fbda9a35bf2a656c73d7
          baseurl=’https://trunk.rdoproject.org/centos7/f6/0a/f60ad6c2010e9a65a993fbda9a35bf2a656c73d7_4dcd3c2b’

          It worked for me ! thanks

        5. Hi Pradeep,
          I run into this issue
          [[email protected] ~]$ sudo -E tripleo-repos -b rocky current
          WARNING: –centos-mirror was deprecated in favour of –mirror
          Loaded plugins: fastestmirror, langpacks, priorities
          Loading mirror speeds from cached hostfile
          * base: centos.mirrors.tds.net
          * extras: mirrors.cat.pdx.edu
          * updates: mirror.linux.duke.edu
          Package yum-plugin-priorities-1.1.31-50.el7.noarch already installed and latest version
          Nothing to do
          Traceback (most recent call last):
          File “/bin/tripleo-repos”, line 10, in
          sys.exit(main())
          File “/usr/lib/python2.7/site-packages/tripleo_repos/main.py”, line 349, in main
          _install_repos(args, base_path)
          File “/usr/lib/python2.7/site-packages/tripleo_repos/main.py”, line 287, in _install_repos
          content = _get_repo(base_path + ‘current/delorean.repo’, args)
          File “/usr/lib/python2.7/site-packages/tripleo_repos/main.py”, line 143, in _get_repo
          r = requests.get(path)
          File “/usr/lib/python2.7/site-packages/requests/api.py”, line 68, in get
          return request(‘get’, url, **kwargs)
          File “/usr/lib/python2.7/site-packages/requests/api.py”, line 50, in request
          response = session.request(method=method, url=url, **kwargs)
          File “/usr/lib/python2.7/site-packages/requests/sessions.py”, line 464, in request
          resp = self.send(prep, **send_kwargs)
          File “/usr/lib/python2.7/site-packages/requests/sessions.py”, line 576, in send
          r = adapter.send(request, **kwargs)
          File “/usr/lib/python2.7/site-packages/requests/adapters.py”, line 431, in send
          raise SSLError(e, request=request)
          requests.exceptions.SSLError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:618)

          Since this is just a Lab test to install openstack undercloud/overcloud process, Is there anyway I can make the SSL verify =False to bypass this error? Please advise. Thanks

          1. Hi , I would suggest you to update your system first(Director/Undercloud), using yum update command and reboot it and then give a try of above command

        6. Hi Pradeep,

          I am facing issue in the last step. Can you please help

          #openstack undercloud install
          .
          .
          .
          Exception: Error inspecting image: docker://docker.io/tripleorocky/centos-binary-cron:current-tripleo
          time=”2019-05-29T16:59:22+05:30″ level=fatal msg=”pinging docker registry returned: Get https://registry-1.docker.io/v2/: x509: certificate is valid for *.example.in, example.in, not registry-1.docker.io”

          Traceback (most recent call last):
          File “/usr/lib/python2.7/site-packages/tripleoclient/v1/tripleo_deploy.py”, line 1159, in _standalone_deploy
          parsed_args)
          File “/usr/lib/python2.7/site-packages/tripleoclient/v1/tripleo_deploy.py”, line 759, in _deploy_tripleo_heat_templates
          self._prepare_container_images(env, roles_data)
          File “/usr/lib/python2.7/site-packages/tripleoclient/v1/tripleo_deploy.py”, line 706, in _prepare_container_images
          env, roles_data, dry_run=True)
          File “/usr/lib/python2.7/site-packages/tripleo_common/image/kolla_builder.py”, line 178, in container_images_prepare_multi
          modify_only_with_labels=modify_only_with_labels,
          File “/usr/lib/python2.7/site-packages/tripleo_common/image/kolla_builder.py”, line 273, in container_images_prepare
          images, tag_from_label)
          File “/usr/lib/python2.7/site-packages/tripleo_common/image/image_uploader.py”, line 452, in discover_image_tags
          discover_args):
          File “/usr/lib/python2.7/site-packages/concurrent/futures/_base.py”, line 605, in result_iterator
          yield future.result()
          File “/usr/lib/python2.7/site-packages/concurrent/futures/_base.py”, line 429, in result
          return self.__get_result()
          File “/usr/lib/python2.7/site-packages/concurrent/futures/thread.py”, line 62, in run
          result = self.fn(*self.args, **self.kwargs)
          File “/usr/lib/python2.7/site-packages/tripleo_common/image/image_uploader.py”, line 556, in discover_tag_from_inspect
          i = DockerImageUploader._inspect(image_url.geturl(), insecure)
          File “/usr/lib/python2.7/site-packages/tenacity/__init__.py”, line 241, in wrapped_f
          return self.call(f, *args, **kw)
          File “/usr/lib/python2.7/site-packages/tenacity/__init__.py”, line 330, in call
          start_time=start_time)
          File “/usr/lib/python2.7/site-packages/tenacity/__init__.py”, line 297, in iter
          raise retry_exc.reraise()
          File “/usr/lib/python2.7/site-packages/tenacity/__init__.py”, line 136, in reraise
          raise self.last_attempt.result()
          File “/usr/lib/python2.7/site-packages/concurrent/futures/_base.py”, line 422, in result
          return self.__get_result()
          File “/usr/lib/python2.7/site-packages/tenacity/__init__.py”, line 333, in call
          result = fn(*args, **kwargs)
          File “/usr/lib/python2.7/site-packages/tripleo_common/image/image_uploader.py”, line 383, in _inspect
          (image, err))
          ImageUploaderException: Error inspecting image: docker://docker.io/tripleorocky/centos-binary-cron:current-tripleo
          time=”2019-05-29T16:59:22+05:30″ level=fatal msg=”pinging docker registry returned: Get https://registry-1.docker.io/v2/: x509: certificate is valid for *.example.in, example.in, not registry-1.docker.io”

        7. Hi , after successfully installation of undercloud.i m not able to see the openstack status list commant while in openstack service list is visble.can you expalin why ????

        8. Hi Pradeep,
          For (TripleOdeployment Laptop Configuration -corei5/32GBRam/1 TB drive is that ok ?), Installed on centos7(Hostname is kvm-hypervisor) & KVM.
          But unable to configure network- Provisioning Network & Nat network)

          Can you please help???

          1. Hi Priya,

            Create an xml file of external and provisioning network and use following commands enable and start the network
            # virsh net-define /tmp/provisioning.xml
            # virsh net-autostart provisioning
            # virsh net-start provisioning

        9. Hi Pradeep,

          I am facing an error “Restart ryslogd service after logging conf change”.

          TASK [Restart rsyslogd service after logging conf change] ******************************************************
          fatal: [undercloud]: FAILED! => {“msg”: “The conditional check ‘logconfig|changed’ failed. The error was: template error while templating string: no filter named ‘changed’. String: {% if logconfig|changed %} True {% else %} False {% endif %}\n\nThe error appears to be in ‘/home/stack/undercloud-ansible-y3VB7b/Undercloud/host_prep_tasks.yaml’: line 657, column 5, but may\nbe elsewhere in the file depending on the exact syntax problem.\n\nThe offending line appears to be:\n\n register: logconfig\n – name: Restart rsyslogd service after logging conf change\n ^ here\n”}

          NO MORE HOSTS LEFT *********************************************************************************************

          PLAY RECAP *****************************************************************************************************
          undercloud : ok=184 changed=53 unreachable=0 failed=1 skipped=164 rescued=0 ignored=1

          Regards
          Nikhil Kapoor

        10. I also faced below error, and I found the this is due to syntax error in YAML. I have made the changes and it work fine for me.
          Change “- logconfig|changed” to “- logconfig is changed” in below files
          /usr/share/openstack-tripleo-heat-templates/docker/services/swift-proxy.yaml
          /usr/share/openstack-tripleo-heat-templates/docker/services/swift-storage.yaml

          Error:
          “msg”: “The conditional check ‘logconfig|changed’ failed

          1. /usr/share/openstack-tripleo-heat-templates/docker/services/swift-proxy.yaml
            /usr/share/openstack-tripleo-heat-templates/docker/services/swift-storage.yaml

            >> Change “is” with “|” test : cause: it’s due to the | test operator being deprecated in Ansible 2.5 and removed in 2.9 (I’m using 2.9 here). 2.5 seems to work ok.

            Apart from that I also applied following fix:
            ‘https://opendev.org/openstack/tripleo-heat-templates/commit/ba461c1c615531dea8b1869c11f0da180d6dd911’

        11. Hello Pardeep, thanks for you updating this post!
          Would you mind to help on this error?
          [[email protected] ~]$ openstack undercloud install

          Exception: Deployment failed
          Traceback (most recent call last):
          File “/usr/lib/python2.7/site-packages/tripleoclient/v1/tripleo_deploy.py”, line 1323, in _standalone_deploy
          raise exceptions.DeploymentError(‘Deployment failed’)
          DeploymentError: Deployment failed
          None
          Install artifact is located at /home/stack/undercloud-install-20200412122510.tar.bzip2

          !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

          Deployment Failed!

          ERROR: Heat log files: /var/log/heat-launcher/undercloud_deploy-ed5RrO

          !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

          reset failed: reset: standard error: Inappropriate ioctl for device

          Many thanks!

          BR/
          Robert

        12. Hi All,
          I am getting the below error “libfacter was not found”, Can anyone help,

          Thursday 02 July 2020 15:34:32 +0530 (0:00:00.064) 0:04:43.680 *********
          ===============================================================================
          Write kolla config json files ————————————————————————————————————————————————————————- 31.66s
          Run tripleo-container-image-prepare ——————————————————————————————————————————————————————- 28.28s
          Install ntpdate ————————————————————————————————————————————————————————————— 24.86s
          install tmpwatch on the host ————————————————————————————————————————————————————————– 22.16s
          container-registry : Docker | pause while Docker restarts ——————————————————————————————————————————————— 10.10s
          Ensure system is NTP time synced ———————————————————————————————————————————————————————– 9.29s
          Run async deployment NetworkDeployment —————————————————————————————————————————————————————– 7.66s
          Write docker config scripts —————————————————————————————————————————————————————————- 6.20s
          container-registry : Start Docker daemon ————————————————————————————————————————————————————— 3.87s
          Write per-step docker-container-startup-configs ——————————————————————————————————————————————————– 3.51s
          container-registry : Docker | reload docker ———————————————————————————————————————————————————— 3.19s
          Run deployment InstanceIdDeployment ——————————————————————————————————————————————————————– 2.81s
          Run deployment UndercloudAllNodesDeployment ———————————————————————————————————————————————————— 2.80s
          Run deployment UndercloudDeployment ——————————————————————————————————————————————————————– 2.78s
          Run deployment UndercloudAllNodesValidationDeployment ————————————————————————————————————————————————– 2.63s
          allow logrotate to read inside containers ————————————————————————————————————————————————————– 2.57s
          Run deployment UndercloudPreDeployment —————————————————————————————————————————————————————– 2.33s
          tripleo-bootstrap : Deploy required packages to bootstrap TripleO ————————————————————————————————————————————– 2.27s
          Run deployment UndercloudHostsDeployment ————————————————————————————————————————————————————— 2.21s
          Run deployment HostsEntryDeployment ——————————————————————————————————————————————————————– 2.17s
          Exception: Deployment failed
          Traceback (most recent call last):
          File “/usr/lib/python2.7/site-packages/tripleoclient/v1/tripleo_deploy.py”, line 1217, in _standalone_deploy
          raise exceptions.DeploymentError(‘Deployment failed’)
          DeploymentError: Deployment failed
          None
          ** Found ansible errors for undercloud deployment! **
          [
          [
          “Debug output for task: Run puppet host configuration for step 1”,
          {
          “changed”: false,
          “failed_when_result”: true,
          “_ansible_no_log”: false,
          “_ansible_verbose_always”: true,
          “outputs.stdout_lines | default([]) | union(outputs.stderr_lines | default([]))”: [
          “libfacter was not found. Please make sure it was installed to the expected location.”
          ]
          }
          ]
          ]

        13. Sanjib Das Pattanayak

          You need to downgrade leatherman packages by “yum downgrade leatherman”.
          I’m using i.e. rpm -qa | grep leatherman
          leatherman-1.3.0-9.el7.x86_64

          1. the downgrade leatherman is complete, but if run hit again $openstack undercloud install, the process install will be trigger to update package again, and so occur fail back

        14. Hi …
          I have created new network as external network and provisioning network (in virt kvm) and able to see it as virbr0 and virbr1… my issue is when I want to edit undercloud.conf,
          ===> local_interface = ? this is interface for provisioning right…so what interface should I add here? from my ifconfig interfaces I just have ens33 (to lan/internet), lo, virbr0 and virbr1 ..anyway I couldn’t find virbr0 and virbr1 interfaces in /etc/sysconfig/network-script . I’m bit confuse here…any help please. Thank you

        15. Hi..Can I just run single VM first to deploy undercloud? once complete create another VMs for computes and controller. Is it possible? Thank you

        16. Hi,
          I am installing the undercloud. In step 6 i am getting below error. Need your exepert help to resolve this issue
          $ sudo openstack undercloud install
          /usr/lib/python2.7/site-packages/requests/__init__.py:91: RequestsDependencyWarning: urllib3 (1.10.2) or chardet (3.0.4) doesn’t match a supported version!
          RequestsDependencyWarning)
          Traceback (most recent call last):
          File “/bin/openstack”, line 6, in
          from openstackclient.shell import main
          File “/usr/lib/python2.7/site-packages/openstackclient/shell.py”, line 22, in
          from osc_lib.api import auth
          File “/usr/lib/python2.7/site-packages/osc_lib/api/auth.py”, line 19, in
          from keystoneauth1.loading import base
          File “/usr/lib/python2.7/site-packages/keystoneauth1/loading/__init__.py”, line 13, in
          from keystoneauth1.loading import adapter
          File “/usr/lib/python2.7/site-packages/keystoneauth1/loading/adapter.py”, line 13, in
          from keystoneauth1 import adapter
          File “/usr/lib/python2.7/site-packages/keystoneauth1/adapter.py”, line 16, in
          from keystoneauth1 import session
          File “/usr/lib/python2.7/site-packages/keystoneauth1/session.py”, line 25, in
          import requests
          File “/usr/lib/python2.7/site-packages/requests/__init__.py”, line 94, in
          from urllib3.exceptions import DependencyWarning
          ImportError: cannot import name DependencyWarning

          1. Hi,
            I hit the same error, and got the hint from this : ‘https://stackoverflow.com/questions/50202238/python-pip-requestsdependencywarning-urllib3-1-9-1-or-chardet-2-3-0-doe’

            Reinstall the urllib3 and chardet, and it works.

          2. Issue with openstck client :

            Solution: Install pip  (yum install python-devel python-pip) and
            upgrade request pacakge (sudo pip install –upgrade requests)

Leave a Reply to Ashish Rawat Cancel reply

Your email address will not be published. Required fields are marked *