How to enable User and Group Disk Quota on CentOS 7 / RHEL 7

As a Linux system admin we generally face low disk space issues. By implementing the user and group disk quota on the file system we can resolve the space issue.

Quota restricts the users to use only allowed disk and inodes on the particular file system. In this post we will discuss how to enable user & group disk quota on /home File system on CentOS 7 & RHEL 7

Step:1 Add usrquota & grpquota option on /home in /etc/fstab file.
[root@linuxtechi ~]# vi /etc/fstab


Save & exit the file.

In this example i have add user and group quota options on /home

Step:2 Remount  /home file system via  mount command
[root@linuxtechi ~]# mount -o remount /home

Now recheck the /home file system whether Quota is enable or not.

[root@linuxtechi ~]# mount | grep /home
/dev/mapper/centos-home on /home type ext4 (rw,relatime,seclabel,quota,usrquota,grpquota,data=ordered)
Step:3 Create Quota Database Files using quotacheck
[root@linuxtechi home]# quotacheck -cugv /home

Whereas :

-c : create quota file and don’t use the existing file
-v : verbose ouput
-u : user disk quota
-g : group disk quota

Above Command will create aquota.user & files under /home

Turn on quota on /home using below command :

[root@linuxtechi ~]# quotaon /home/
Step:4 Assign user & group disk quota via edquota commands

Syntax # edquota -u <User_Name>

# edquota -g <Group_Name>

[root@linuxtechi ~]# edquota -u jack


[root@linuxtechi ~]# edquota -g sys_admin


As shown above we have two kind of Disk quota limits :

soft : It will warn the users if the soft limit of disk quota reached ( size is in KB), in above example for jack user soft limit is 5500 KB ( approx 5.5MB )

hard : It will not allow the users to create new files once the hard limit is reached. ( Size in KB ), in above example hard limit for jack user is 6000 KB ( approx 6 MB )

Note : We can also set the Quota on the basis of the inodes ( i.e numbers of files that the user can create on particular file system)

Let’s take an example , login as jack user and try to create a file of 8MB.

[root@linuxtechi ~]# su - jack

[jack@linuxtechi ~]$ dd if=/dev/zero of=bgfile bs=1M count=8
dm-2: warning, user block quota exceeded.
dm-2: write failed, user block limit reached.
dd: error writing ‘bgfile’: Disk quota exceeded
6+0 records in
5+0 records out
6144000 bytes (6.1 MB) copied, 0.00711317 s, 864 MB/s

As we see above soft & hard limit is exceeded for jack user. Now onwards user jack can’t create new files.

Step:5 Display Quota report for Users in human readable
[root@linuxtechi ~]# repquota -as
Step:6 Configure Grace Period for Soft Limit

Grace period is the amount of time during which soft limit can can be exceeded, once the grace period reached then soft limit will become the hard limit.

Use the edquota command to set grace period ,

[root@linuxtechi ~]# edquota -t


Please don’t hesitate to share your feedback and comments on this post 🙂

Also ReadHow to Setup Disk Quota on XFS File System in Linux Servers

Share on:

I am a Cloud Consultant with over 15 years of experience in Linux, Kubernetes, cloud technologies (AWS, Azure, OpenStack), automation (Ansible, Terraform), and DevOps. I hold certifications like RHCA, CKA, CKAD, CKS, AWS, and Azure.

11 thoughts on “How to enable User and Group Disk Quota on CentOS 7 / RHEL 7”

  1. What would happen if you added quota to /home when its still part of /? Would the quota only affect that specific directory or the whole root file system?

  2. Dear Pradeep,

    I got following output when edit fstab and after remount

    cat /etc/fstab
    /dev/mapper/centos_ns2-home /home xfs defaults,usrquota,grpquota 1 2

    [root@bus1 ~]# mount -o remount /home
    [root@bus1 ~]# mount | grep /home
    /dev/mapper/centos_ns2-home on /home type xfs (rw,relatime,attr2,inode64,noquota)

    [root@bus1 ~]# quotacheck -cugv /home
    quotacheck: Mountpoint (or device) /home not found or has no quota enabled.
    quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.

    What is the reason pls expalin in order to activate quota

    • Hi Buddhika,

      Steps mentioned in tutorial is for ext4/ext3 file system but you are trying these steps on xfs file system that’s why you are getting errors.

      We will shortly write an article on XFS quota.


Leave a Reply to King Crimson Cancel reply